-
Call Us +8613677218585 -
Mail Us info@isuzutruckscn.com -
Japan dump truck Telescopic Hydraulic Cylinder for sale
Order(MOQ):
1Dump truck hydraulic hoist system for Japan Dumper Trucks
Characteristics:
| - Larger diameter, more lifting capacity. |
| - Max working pressure reaches 250 bar,better anti-pressure ability. |
| - Special material with high quality, high-precision, better anti-bending ability. |
| - New model guide ring combined with lubricating material,guarantee smooth lifting. |
| - Modified seal structure, guarantee no oil leak under high pressure and bad working environments. |
| - Maintenance-free support, longer working life. |
| - Integrated design, easy to maintain. |
| -100% tested, guarantee high quality. |
Specifications:
|
Model |
Extended Stages |
Working Pressure (MPa) |
Max. stage Diameter (mm) |
Max. stroke (mm) |
Lifting Capacity (ton) |
Suitable Length of Truck Body (m) |
|
129-3E-3880 |
3 |
16-19 |
129 |
3880 |
20-35 |
5.2 |
|
149-3E-3880 |
3 |
16-19 |
149 |
3880 |
25-45 |
5.2 |
|
149-3E-4280 |
3 |
16-19 |
149 |
4280 |
25-45 |
5.6 |
|
149-4E-3880 |
4 |
16-19 |
149 |
3880 |
25-40 |
5.2 |
|
149-4E-4280 |
4 |
16-19 |
149 |
4280 |
25-40 |
5.6 |
|
169-4E-4280 |
4 |
16-19 |
169 |
4280 |
30-50 |
5.2-5.6 |
|
169-4E-4640 |
4 |
16-19 |
169 |
4640 |
32-55 |
5.6-6.1 |
|
169-4E-5000 |
4 |
16-19 |
169 |
5000 |
32-60 |
6.2-6.8 |
|
169-4E-5180 |
4 |
16-19 |
169 |
5180 |
32-60 |
6.2-6.9 |
|
169-4E-5390 |
4 |
16-19 |
169 |
5390 |
32-60 |
6.2-6.9 |
|
169-4E-5460 |
4 |
16-19 |
169 |
5460 |
32-60 |
6.5-7.3 |
|
185-4E-4280 |
4 |
16-19 |
185 |
4280 |
25-45 |
5.6 |
|
185-4E-4640 |
4 |
16-19 |
185 |
4640 |
30-45 |
5.6-6.1 |
|
185-4E-5000 |
4 |
16-19 |
185 |
5000 |
32-50 |
6.2-6.5 |
|
185-4E-5390 |
4 |
16-19 |
185 |
5390 |
40-60 |
6.2-6.8 |
|
185-4E-5460 |
4 |
16-19 |
185 |
5460 |
40-65 |
6.5-7.3 |
|
185-4E-5780 |
4 |
16-19 |
185 |
5780 |
45-70 |
6.9-7.7 |
|
185-4E-6000 |
4 |
16-19 |
185 |
6000 |
50-80 |
7.3-8.2 |
|
191-5E-5780 |
5 |
16-19 |
191 |
5780 |
40-70 |
6.9-7.7 |
|
191-5E-6200 |
5 |
16-19 |
191 |
6200 |
45-80 |
7.3-8.2 |
|
191-5E-7130 |
5 |
16-19 |
191 |
7130 |
50-85 |
7.8-8.5 |
|
191-5E-9030 |
5 |
16-19 |
191 |
9030 |
55-90 |
10-11 |
|
220-5E-7130 |
5 |
16-19 |
220 |
7130 |
65-100 |
7.8-8.5 |
|
220-5E-9030 |
5 |
16-19 |
220 |
9030 |
65-100 |
10-11 |
|
Customization also available according to your requirement. |
||||||
Prducing Equipment:
Dump truck hydraulic hoist system for Japan Dumper Trucks
Dump truck hydraulic hoist system for Japan Dumper Trucks
Dump truck hydraulic hoist system for Japan Dumper Trucks
Dump truck hydraulic hoist system for Japan Dumper Trucks
Dump truck hydraulic hoist system for Japan Dumper Trucks
Processing and inspection:
1.Cylinder Tube
According to the work pressure,work temperature,work situation and other special requirements,different cylinder tube will be choosed.
1.1 Cylinder Tube:cold drawn precision seamless steel tube,hot rolled seamless steel tube,forged tube.
1.2 Tube Material: 27SiMn,etc.
1.3 Surface Roughness:R0.16-0.32μm
1.4 Inside Chromating:If necessary,inside tube will be chromated.
2.Piston Rod
2.1 Rod Material:35#,SAE1045(45#),35CrMo,42CrMo4,etc.
2.1 Technical Treatment: Quenched and tempered.1.5-1mm,or 1.03mm per millimetre.
3.Seal Kits
According to customers' requirements and work condition,we will choose suitable seal kits,including:Hallite,NOK,SKF,Parker,Merker,Trelleborg,China made,Taiwan made.We will supply you suitable seal kits to ensure hydraulic cylinders a long lifetime,easy maintenance and simple repairing.
4.Inspection and Testing
4.1 We have professional quality control department,every step from raw material to finished product is in the same factory,each procedure will be tested by professional inspector.
4.2 Before hydraulic cylinder is assemblied , every spare parts would be measured and cleaned .After hydraulic cylinder is assemblied , pressure test would be carried out one by one.We ensure the testing pressure is 30%-50% higher than rated pressure in almost one hour's test.Each hydraulic cylinder must be tested without any leakage.
Genuine ISUZU spare parts, original universal joint for ISUZU 700P trucks, ISUZU universal joint #8980207890 for sale.
Learn More
ISUZU water tanker truck is based on the GIGA chassis and is equipped with an ISUZU engine with a power of 350HP, which provides stable power output for the vehicle and ensures efficient operation under various operating conditions. The vehicle is equipped with a 15000 liters water tank, which can ensure long-term operation requirements, reduce the frequency of adding water, and improve operation efficiency. The spraying width is adjustable, from a minimum of 3 meters to a maximum of 6 meters, which can meet the needs of various width ranges of operations.
Learn More
ISUZU truck-mounted crane, also known as ISUZU crane truck, is a kind of engineering equipment that combines a crane and a vehicle. Its design concept is to combine the hoisting function of the crane with the moving function of the vehicle, providing users with an efficient and convenient lifting solution. ISUZU truck-mounted cranes are widely used in construction, logistics, gardening, fire protection and other fields because of their flexibility and practicality.
Learn More
ISUZU GIGA Concrete Pump Truck (also called ISUZU GIGA Truck mounted concrete pump, ISUZU Cement pump truck with boom ) has 38m vertical reach with the height limit programmed to prevent boom contact with an obstruction or overhead hazard.
Learn More
Brand new Isuzu GIGA Trash Compactor Truck, GIGA Rear Loader, Compression Garbage Truck GIGA for sale
Learn More
sweeper truck 2015 year brand new ISUZU chassis for sale,5cbm capacity Isuzu Road Cleaning Sweeper Truck For Sale,good price New Isuzu street cleaning truck, road sweeper truck for sale
Learn More
