-
Call Us +8613677218585 -
Mail Us info@isuzutruckscn.com -
The ISUZU water bowser truck is a sprinkler vehicle based on the Isuzu light truck chassis. It is widely used in road sprinkling, garden irrigation, construction site dust reduction and other scenarios. This vehicle is equipped with a stainless steel water tank and uses an advanced water pump system with excellent performance and efficiency. It is a powerful assistant for environmental protection and urban greening.
Work capacity:
5000 LitersTruck model:
PT5050GSSEngine power:
120 HPEngine type:
4KH1CN6LBAxle drive:
4×2Gear box:
MSB 5-speed, manualRemarks:
Stainless steel water tank, China famous brand water pump
ISUZU water sprinkler trucks are mainly used for urban roads, green belts, lawn greening, large factories, gardens, construction and other units for road cleaning, sanitation, dust prevention, watering, and chemical spraying for green belts on both sides of the road and large gardens. Water truck can also be called as water bowser, water tanker truck. It has the functions of water sprinkling, dust pressing, high and low position spraying, pesticide spraying, etc. It can also be used for temporary emergency fire sprinkler.
ISUZU mobile water tanker consists of chassis, tank, water pump, water spray system, control system and other main parts. All parts cooperate with each other to ensure that the sprinkler truck works normally and stably.
This ISUZU water truck is built on the basis of the ISUZU KV100 chassis and is equipped with an ISUZU diesel engine with a power of 120 hp. The engine has stable performance and can provide sufficient power for the sprinkler truck.
The tank is the water storage device of the sprinkler truck. It is made of high-quality stainless steel and has the characteristics of corrosion resistance and long service life. A water level gauge and overflow device are installed inside the tank to facilitate monitoring of water levels and preventing overflow. The water pump is used to pump the water in and out of the tank and transport it to the nozzles through the piping system for sprinkling. The sprinkler system includes nozzle and piping system. The nozzles are used to spray the water out, and the piping system is responsible for carrying the water from the tank to the nozzles. The design of the nozzles and piping system determines the range and effectiveness of the sprinkler.
Product Specifications
|
ISUZU Water Bowser Sprinkler Parameters |
|||
|
Vehicle |
Vehicle brand |
POWERSTAR |
|
|
Overall dimensions |
5900×2000×2400 mm |
||
|
Gross vehicle weight |
7300 kg |
||
|
Curb weight |
3600 kg |
||
|
Chassis |
Brand |
ISUZU |
|
|
Model |
QL1073BU |
||
|
Wheelbase |
3360 mm |
||
|
Front axle |
2500 kg |
||
|
Rear axle |
4800 kg |
||
|
Max. driving speed(km/h) |
90 km/h |
||
|
Clutch |
Reinforced diaphragm clutch |
||
|
Brakes |
Service brake: dual circuit compressed air brake Parking brake:(emergency brake): spring energy, compressed air operating on rear wheels |
||
|
Auxiliary brake: engine exhaust valve brake |
|||
|
Steering Gear |
Power steering, hydraulic steering with power assistance |
||
|
Tire |
Quantity |
6 pcs with one spare tire |
|
|
Specifications |
7.00R16 |
||
|
Transmission |
Manual type, 5 Forwards and 1 reverse |
||
|
Cabin |
Single row with 3 seats, with air conditioner. |
||
|
Engine |
Brand |
ISUZU |
|
|
Model |
4KH1CN6LB |
||
|
Fuel type |
Diesel |
||
|
Power |
88 kw |
||
|
Horsepower |
120hp |
||
|
Displacement |
2999 ml |
||
|
Cylinder number |
4 |
||
|
Emission standard |
Euro 5 |
||
|
Upper Body |
|||
|
Water tank |
Capacity |
5000 L |
|
|
Tank material |
Q235 carbon steel |
||
|
Thickness(mm) |
4 |
||
|
Water pump |
Brand |
China famous brand |
|
|
Flow |
20 m3/h |
||
|
Suction Height |
7 m |
||
|
Function |
1. Front Side Rear Sprinkling width≥14m |
||
|
2. Water cannon range≥28m |
|||
Maintenance tips of ISUZU water tanker truck
In order to keep your ISUZU water sprinkler truck running well, regular maintenance is essential. Here are some key maintenance steps to ensure your sprinkler truck is in top condition at all times.
1. Check the sealing: Frequently check the sealing condition of the connections, switches and water-absorbing hoses of the water system. As soon as a leak is discovered, replace the seal immediately.
2. Inspection of fixed components: Frequently check the fixation of the water tank, pump frame, and bracket to ensure that all nuts are tightened to ensure the stability of the connection.
3. Inspection of the power take-off and water pump: Check the connection between the power take-off and the water pump to ensure that they are operating normally. If oil leakage is found in the power take-off and water pump during use, the seals should be replaced immediately.
4. Use in severe cold environments: In severely cold areas, all accumulated water in the water pump, water tank and piping system should be drained immediately after use. Note that the water pump drain plug should be closed tightly after draining water, otherwise the water suction function of the water pump will be affected.
5. Protection of tank paint: Avoid tank paint coming into contact with gasoline and kerosene, which will accelerate the damage of the paint. Regularly check the quality of the tank's paint, and if damage is found, repaint it promptly to prevent the tank from rusting.
6. Maintenance of chassis and engine: Carry out maintenance according to the operating instructions of the truck.
7. Keep the ball valve clean: Ensure that the medium passing through the ball valve is clean to avoid debris clogging the filter and affecting the flow rate. At the same time, each ball valve should not be left half-open for a long time to prevent the sealing ring from deforming.
8. Cleaning of the pump inlet filter: Frequently disassemble and clean the pump inlet filter to prevent clogging with debris and ensure smooth flow.
9. Tightening of U-bolts: Since there is a wood glue pad between the tank and the truck beam, the U-bolts may become loose due to the deformation of the wood glue after heavy loading. Therefore, these bolts must be tightened regularly, especially in the early years of a new vehicle.
HINO Water Bowser (also called Water Tank Sprinkler Truck, Japan water bowser, water tank lorry, mobile water truck, water carrying truck, truck mounted water tanker, Pressure Washer Bowsers) are used to deliver potable drinking water and non potable water for dust control or any other specific use that non drinking water can be used for. Our tanks transport water that is dispensed through a pumping system either through a hose reel for delivery or through a series of spray heads and nozzles to spray the water in different directions. Powerstar water tankers are available in steel, stainless steel, or aluminum, and can be constructed to haul drinking water and non drinking water each with their own specific and different types of pumping systems. The water tanker volume can be from 2,000L to 35,000L. Now, Customize your water tank exactly how you want! We offer a variety of components and features that can make your tank the safest and most efficient tank you own.
Learn More
ISUZU GIGA Water tanker trucks are used to deliver potable drinking water and non potable water for dust control or any other specific use that non drinking water can be used for.
Learn More
Hot-selling ISUZU GIGA Water Tanker Truck, ISUZU water spray truck, water bowser supplier.
Learn More
